- Processors - Desktops
- Processors - Servers
- Processors - Mobile
- CPU Fans & Heatsinks
- Thermal Compound / Grease
- Water / Liquid Cooling
- DIY Cooling
- Desktop Memory
- Laptop Memory
- Mac Memory
- Server Memory
- System Specific Memory
- Memory Cards
- USB Flash Drives
- AMD Motherboards
- Intel Motherboards
- Embedded Solutions
- Server Motherboards
- Development Boards
- Motherboard Accessories
- Add-On Cards
- CPU Fans & Heatsinks
- Internal Power Cables
- Processors - Desktops
- Processors - Servers
- Processors - Mobile
- CPU Fans & Heatsinks
- Thermal Compound / Grease
- Water / Liquid Cooling
- DIY Cooling
- Desktop Memory
- Laptop Memory
- Mac Memory
- Server Memory
- System Specific Memory
- Memory Cards
- USB Flash Drives
- AMD Motherboards
- Intel Motherboards
- Embedded Solutions
- Server Motherboards
- Development Boards
- Motherboard Accessories
- Add-On Cards
- CPU Fans & Heatsinks
- Internal Power Cables
In Stock
$441.10
Teltonika RUT956700600, Industrial Cellular Router, 2xSIM Card Slot, 3xLAN Port, 1xWAN Port, 2xAntenna, Wireless, LTE-4G,
In Stock
$441.10
Quantity
In Stock
Freight Calculator
- •Brand: Teltonika
- •Warranty: 2 Year
- •Model: 99X361718
The Teltonika TLT LAN RUT956 is a high-performance 4G LTE mobile router designed for IT professionals and businesses. With lightning-fast connectivity, secure VPN support, and a 2-year warranty, this router is the perfect solution for those seeking reliable networking products. Compatible with a wide range of devices, the Teltonika TLT LAN RUT956 offers exceptional performance and peace of mind for all your networking needs.
Need Help or Found it Cheaper?
Chat with our experts for product advice or price matching on genuine written quotes.
MOBILE
-
Mobile module
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
-
SIM switch
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
-
Black/White list
Operator black/white list (by country or separate operators)
-
Multiple PDN
Possibility to use different PDNs for multiple network access and services
-
Band management
Band lock, Used band status display
-
APN
Auto APN
-
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
-
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
-
Wireless mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
-
Wi-Fi security
WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
SSID/ESSID
SSID stealth mode and access control based on MAC address
-
Wi-Fi users
Up to 100 simultaneous connections
-
Wireless Connectivity Features
Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
-
Wireless MAC filter
Whitelist, blacklist
NETWORK
-
Hotspot
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
-
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
-
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
-
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall
Port forward, traffic rules, custom rules
-
DHCP
Static and dynamic IP allocation, DHCP Relay
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS
Supported >25 service providers, others can be configured manually
-
Network backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Load balancing
Balance Internet traffic over multiple WAN connections
-
SSHFS
Possibility to mount remote file system via SSH protocol
ETHERNET
-
WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
-
LAN
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
SECURITY
-
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
-
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN
Port and tag-based VLAN separation
-
Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number
-
WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Access control
Flexible access control of SSH, Web interface, CLI and Telnet
VPN
-
OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods
-
OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
-
IPsec
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
-
GRE
GRE tunnel, GRE tunnel over IPsec support
-
PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
-
Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
DMVPN
Method of building scalable IPsec VPNs
-
SSTP
SSTP client instance support
-
ZeroTier
ZeroTier VPN client support
-
WireGuard
WireGuard VPN client and server support
-
Tinc
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
BACNET
-
Supported modes
Router
-
Supported connection types
RS485, TCP
OPC UA
-
Supported modes
Client, Server
-
Supported connection types
TCP
MODBUS
-
Supported modes
Server, Client
-
Supported connection types
RTU (RS232, RS485), TCP, USB
-
Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
-
Supported data formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
-
Protocol
HTTP(S), MQTT, Azure MQTT, Kinesis
MQTT GATEWAY
-
MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
-
Supported modes
TCP Master, DNP3 Outstation, RTU Master
DLMS
-
DLMS Support
DLMS - standard protocol for utility meter data exchange
API
-
Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
-
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
FOTA
Firmware update from server, automatic notification
-
SSH
SSH (v1, v2)
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Call
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
-
TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT
MQTT Broker, MQTT publisher
-
SNMP
SNMP (v1, v2, v3), SNMP Trap
-
JSON-RPC
Management API over HTTP/HTTPS
-
RMS
Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Cloud of Things
Allows monitoring of: Device data, Mobile data, Network info, Availability
-
ThingWorx
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Azure IoT Hub
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
-
CPU
Mediatek, 580 MHz, MIPS 24KEc
-
RAM
128 MB, DDR2
-
FLASH storage
16 MB, SPI Flash
FIRMWARE / CONFIGURATION
-
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup
-
FOTA
Update FW
-
RMS
Update FW/configuration for multiple devices at once
-
Keep settings
Update FW without losing current configuration
FIRMWARE CUSTOMISATION
-
Operating system
RutOS (OpenWrt based Linux OS)
-
Supported languages
Busybox shell, Lua, C, C++
-
Development tools
SDK package with build environment provided
LOCATION TRACKING
-
GNSS
GPS, GLONASS, BeiDou, Galileo and QZSS
-
Coordinates
GNSS coordinates via WebUI, SMS, TAVL, RMS
-
NMEA
NMEA 0183
-
NTRIP
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
-
Server software
Supported server software TAVL, RMS
-
Geofencing
Configurable multiple geofence zones
SERIAL
-
RS232
DB9 connector, RS232 (with RTS, CTS flow control)
-
RS485
RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
-
Serial functions
Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
USB
-
Data rate
USB 2.0
-
Applications
Samba share, USB-to-serial
-
External devices
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
-
Storage formats
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
INPUT / OUTPUT
-
Input
1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
-
Output
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
-
Events
Email, RMS, SMS
-
I/O juggler
Allows to set certain I/O conditions to initiate event
POWER
-
Connector
4-pin industrial DC power socket
-
Input voltage range
9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
-
PoE (passive)
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
-
Power consumption
< 2 W idle, < 7 W Max
PHYSICAL INTERFACES
-
Ethernet
4 x RJ45 ports, 10/100 Mbps
-
I/O’s
2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)
-
Status LEDs
1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
-
SIM
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
-
Power
1 x 4-pin power connector
-
Input/output
1 x 10-pin industrial socket for inputs/outputs
-
Antennas
2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
-
USB
1 x USB A port for external devices
-
RS232
1 x DB9 socket
-
RS485
1 x 6-pin industrial socket
-
Reset
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
-
Casing material
Aluminium housing, plastic panels
-
Dimensions (W x H x D)
110 x 50 x 100 mm
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
REGULATORY & TYPE APPROVALS
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
EMC EMISSIONS & IMMUNITY
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
RF
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
SAFETY
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
What are my payment methods
• Bank Transfer - No Fees
• Credit Cards - VISA, MasterCard 1.5% Handling Fee
• PayPal - 2.75% Handling Fee
Bank Transfer
In order to pay for your order by bank transfer, you must first complete the
checkout process as normal. Upon completion you will be issued with an invoice
for your order which will be processed once your payment clears. From here you
may log onto your internet banking and make a payment for the order amount to
the bank account listed below. Alternatively, you may visit your local branch,
fill out a Deposit Slip with the correct details using the information below
and process this transfer with the bank teller in person.
Bank: Westpac Banking
Corporation
Account Name: ZCOMPUTE PTY LTD.
BSB: 034108
Account Number: 606317
Please add your invoice number and name in the description area when placing your deposit. If you do not have the relevant details on hand, or are unable to add the description, please email or fax through a copy of your deposit receipt as soon as possible. Please note that your order will not be processed until the funds have successfully deposited into our bank account and the payment has been confirmed as received by our accounts department. This process takes 1 - 5 business days.
Credit Card
Zotim accepts all major credit cards - Visa,
Master Card and Debit Cards. Please note, credit card handling fees do apply as
follows: VISA/MasterCard at 1.5%. These fees are comprised of Merchant Service
fees, Terminals fees, fraud prevention costs that cannot absorb due to the
extremely lower than retail prices we offer.
Please note: Due to the rise of credit card fraud
and for your security all credit card orders will be subject to advanced
security checks. If your order does not meet our security check requirements,
you will be contacted and further credit card security procedures will be
implemented.
Shipping
We prefer to use couriers for shipping which include Couriers Please. Startrack and Toll Express.
The courier require a signature on delivery so please give a delivery address where someone will be available to sign for the parcel.
We can use Australia Post as well, however parcels sent through Australia Post are not insured for loss or damage.
How is shipping cost calculated?Shopping at zotim.com.au is all about how much you can save with our shipping methods. As a brief summary - if you buy more than 1 item, your shipping cost for the 2nd, 3rd & subsequent items will be less than the first item!
We can afford this mainly because the cost of the delivery driver travelling to your address is already covered by the first parcel delivery charge, so the remaining parcels are only charged by the additional weight.
Note that we aren't always able to add items to orders after the order is placed, so be sure to order everything you want in one go when you first checkout, to ensure the quickest possible processing of your order, and the lowest possible shipping cost. We also aren't able to merge orders - the above images show what is possible if all items from Order 1 and 2 are ordered on a single order, it does not infer that we can combine multiple orders (our system is unable to accommodate this at this time).
Teltonika RUT956700600, Industrial Cellular Router, 2xSIM Card Slot, 3xLAN Port, 1xWAN Port, 2xAntenna, Wireless, LTE-4G,
In Stock
$441.10
Australian Reseller|Australian Stock|Australian Warranty
- •Brand: Teltonika
- •Warranty: 2 Year
- •Model: 99X361718
The Teltonika TLT LAN RUT956 is a high-performance 4G LTE mobile router designed for IT professionals and businesses. With lightning-fast connectivity, secure VPN support, and a 2-year warranty, this router is the perfect solution for those seeking reliable networking products. Compatible with a wide range of devices, the Teltonika TLT LAN RUT956 offers exceptional performance and peace of mind for all your networking needs.
Need Help or Found it Cheaper?
Chat with our experts for product advice or price matching on genuine written quotes.
Sold by: Zotim
Quantity
Freight Calculator
MOBILE
-
Mobile module
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
-
SIM switch
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
-
Black/White list
Operator black/white list (by country or separate operators)
-
Multiple PDN
Possibility to use different PDNs for multiple network access and services
-
Band management
Band lock, Used band status display
-
APN
Auto APN
-
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
-
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
-
Wireless mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
-
Wi-Fi security
WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
SSID/ESSID
SSID stealth mode and access control based on MAC address
-
Wi-Fi users
Up to 100 simultaneous connections
-
Wireless Connectivity Features
Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
-
Wireless MAC filter
Whitelist, blacklist
NETWORK
-
Hotspot
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
-
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
-
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
-
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall
Port forward, traffic rules, custom rules
-
DHCP
Static and dynamic IP allocation, DHCP Relay
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS
Supported >25 service providers, others can be configured manually
-
Network backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Load balancing
Balance Internet traffic over multiple WAN connections
-
SSHFS
Possibility to mount remote file system via SSH protocol
ETHERNET
-
WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
-
LAN
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
SECURITY
-
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
-
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN
Port and tag-based VLAN separation
-
Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number
-
WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Access control
Flexible access control of SSH, Web interface, CLI and Telnet
VPN
-
OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods
-
OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
-
IPsec
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
-
GRE
GRE tunnel, GRE tunnel over IPsec support
-
PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
-
Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
DMVPN
Method of building scalable IPsec VPNs
-
SSTP
SSTP client instance support
-
ZeroTier
ZeroTier VPN client support
-
WireGuard
WireGuard VPN client and server support
-
Tinc
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
BACNET
-
Supported modes
Router
-
Supported connection types
RS485, TCP
OPC UA
-
Supported modes
Client, Server
-
Supported connection types
TCP
MODBUS
-
Supported modes
Server, Client
-
Supported connection types
RTU (RS232, RS485), TCP, USB
-
Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
-
Supported data formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
-
Protocol
HTTP(S), MQTT, Azure MQTT, Kinesis
MQTT GATEWAY
-
MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
-
Supported modes
TCP Master, DNP3 Outstation, RTU Master
DLMS
-
DLMS Support
DLMS - standard protocol for utility meter data exchange
API
-
Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
-
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
FOTA
Firmware update from server, automatic notification
-
SSH
SSH (v1, v2)
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Call
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
-
TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT
MQTT Broker, MQTT publisher
-
SNMP
SNMP (v1, v2, v3), SNMP Trap
-
JSON-RPC
Management API over HTTP/HTTPS
-
RMS
Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Cloud of Things
Allows monitoring of: Device data, Mobile data, Network info, Availability
-
ThingWorx
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Azure IoT Hub
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
-
CPU
Mediatek, 580 MHz, MIPS 24KEc
-
RAM
128 MB, DDR2
-
FLASH storage
16 MB, SPI Flash
FIRMWARE / CONFIGURATION
-
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup
-
FOTA
Update FW
-
RMS
Update FW/configuration for multiple devices at once
-
Keep settings
Update FW without losing current configuration
FIRMWARE CUSTOMISATION
-
Operating system
RutOS (OpenWrt based Linux OS)
-
Supported languages
Busybox shell, Lua, C, C++
-
Development tools
SDK package with build environment provided
LOCATION TRACKING
-
GNSS
GPS, GLONASS, BeiDou, Galileo and QZSS
-
Coordinates
GNSS coordinates via WebUI, SMS, TAVL, RMS
-
NMEA
NMEA 0183
-
NTRIP
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
-
Server software
Supported server software TAVL, RMS
-
Geofencing
Configurable multiple geofence zones
SERIAL
-
RS232
DB9 connector, RS232 (with RTS, CTS flow control)
-
RS485
RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
-
Serial functions
Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
USB
-
Data rate
USB 2.0
-
Applications
Samba share, USB-to-serial
-
External devices
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
-
Storage formats
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
INPUT / OUTPUT
-
Input
1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
-
Output
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
-
Events
Email, RMS, SMS
-
I/O juggler
Allows to set certain I/O conditions to initiate event
POWER
-
Connector
4-pin industrial DC power socket
-
Input voltage range
9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
-
PoE (passive)
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
-
Power consumption
< 2 W idle, < 7 W Max
PHYSICAL INTERFACES
-
Ethernet
4 x RJ45 ports, 10/100 Mbps
-
I/O’s
2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)
-
Status LEDs
1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
-
SIM
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
-
Power
1 x 4-pin power connector
-
Input/output
1 x 10-pin industrial socket for inputs/outputs
-
Antennas
2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
-
USB
1 x USB A port for external devices
-
RS232
1 x DB9 socket
-
RS485
1 x 6-pin industrial socket
-
Reset
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
-
Casing material
Aluminium housing, plastic panels
-
Dimensions (W x H x D)
110 x 50 x 100 mm
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
REGULATORY & TYPE APPROVALS
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
EMC EMISSIONS & IMMUNITY
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
RF
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
SAFETY
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
What are my payment methods
• Bank Transfer - No Fees
• Credit Cards - VISA, MasterCard 1.5% Handling Fee
• PayPal - 2.75% Handling Fee
Bank Transfer
In order to pay for your order by bank transfer, you must first complete the
checkout process as normal. Upon completion you will be issued with an invoice
for your order which will be processed once your payment clears. From here you
may log onto your internet banking and make a payment for the order amount to
the bank account listed below. Alternatively, you may visit your local branch,
fill out a Deposit Slip with the correct details using the information below
and process this transfer with the bank teller in person.
Bank: Westpac Banking
Corporation
Account Name: ZCOMPUTE PTY LTD.
BSB: 034108
Account Number: 606317
Please add your invoice number and name in the description area when placing your deposit. If you do not have the relevant details on hand, or are unable to add the description, please email or fax through a copy of your deposit receipt as soon as possible. Please note that your order will not be processed until the funds have successfully deposited into our bank account and the payment has been confirmed as received by our accounts department. This process takes 1 - 5 business days.
Credit Card
Zotim accepts all major credit cards - Visa,
Master Card and Debit Cards. Please note, credit card handling fees do apply as
follows: VISA/MasterCard at 1.5%. These fees are comprised of Merchant Service
fees, Terminals fees, fraud prevention costs that cannot absorb due to the
extremely lower than retail prices we offer.
Please note: Due to the rise of credit card fraud
and for your security all credit card orders will be subject to advanced
security checks. If your order does not meet our security check requirements,
you will be contacted and further credit card security procedures will be
implemented.
Shipping
We prefer to use couriers for shipping which include Couriers Please. Startrack and Toll Express.
The courier require a signature on delivery so please give a delivery address where someone will be available to sign for the parcel.
We can use Australia Post as well, however parcels sent through Australia Post are not insured for loss or damage.
How is shipping cost calculated?Shopping at zotim.com.au is all about how much you can save with our shipping methods. As a brief summary - if you buy more than 1 item, your shipping cost for the 2nd, 3rd & subsequent items will be less than the first item!
We can afford this mainly because the cost of the delivery driver travelling to your address is already covered by the first parcel delivery charge, so the remaining parcels are only charged by the additional weight.
Note that we aren't always able to add items to orders after the order is placed, so be sure to order everything you want in one go when you first checkout, to ensure the quickest possible processing of your order, and the lowest possible shipping cost. We also aren't able to merge orders - the above images show what is possible if all items from Order 1 and 2 are ordered on a single order, it does not infer that we can combine multiple orders (our system is unable to accommodate this at this time).
Teltonika RUT956700600, Industrial Cellular Router, 2xSIM Card Slot, 3xLAN Port, 1xWAN Port, 2xAntenna, Wireless, LTE-4G,
In Stock
$441.10
Australian Reseller|Australian Stock|Australian Warranty
- •Brand: Teltonika
- •Warranty: 2 Year
- •Model: 99X361718
The Teltonika TLT LAN RUT956 is a high-performance 4G LTE mobile router designed for IT professionals and businesses. With lightning-fast connectivity, secure VPN support, and a 2-year warranty, this router is the perfect solution for those seeking reliable networking products. Compatible with a wide range of devices, the Teltonika TLT LAN RUT956 offers exceptional performance and peace of mind for all your networking needs.
Need Help or Found it Cheaper?
Chat with our experts for product advice or price matching on genuine written quotes.
Sold by: Zotim
Quantity
Freight Calculator
MOBILE
-
Mobile module
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
-
SIM switch
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
USSD
Supports sending and reading Unstructured Supplementary Service Data messages
-
Black/White list
Operator black/white list (by country or separate operators)
-
Multiple PDN
Possibility to use different PDNs for multiple network access and services
-
Band management
Band lock, Used band status display
-
APN
Auto APN
-
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
-
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
WIRELESS
-
Wireless mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
-
Wi-Fi security
WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
-
SSID/ESSID
SSID stealth mode and access control based on MAC address
-
Wi-Fi users
Up to 100 simultaneous connections
-
Wireless Connectivity Features
Fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
-
Wireless MAC filter
Whitelist, blacklist
NETWORK
-
Hotspot
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
-
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
-
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
-
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Firewall
Port forward, traffic rules, custom rules
-
DHCP
Static and dynamic IP allocation, DHCP Relay
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
DDNS
Supported >25 service providers, others can be configured manually
-
Network backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
-
Load balancing
Balance Internet traffic over multiple WAN connections
-
SSHFS
Possibility to mount remote file system via SSH protocol
ETHERNET
-
WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
-
LAN
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
SECURITY
-
Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
-
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
VLAN
Port and tag-based VLAN separation
-
Mobile quota control
Mobile data limit, customizable period, start time, warning limit, phone number
-
WEB filter
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Access control
Flexible access control of SSH, Web interface, CLI and Telnet
VPN
-
OpenVPN
Multiple clients and a server can run simultaneously, 27 encryption methods
-
OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
-
IPsec
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
-
GRE
GRE tunnel, GRE tunnel over IPsec support
-
PPTP, L2TP
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
-
Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
DMVPN
Method of building scalable IPsec VPNs
-
SSTP
SSTP client instance support
-
ZeroTier
ZeroTier VPN client support
-
WireGuard
WireGuard VPN client and server support
-
Tinc
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
BACNET
-
Supported modes
Router
-
Supported connection types
RS485, TCP
OPC UA
-
Supported modes
Client, Server
-
Supported connection types
TCP
MODBUS
-
Supported modes
Server, Client
-
Supported connection types
RTU (RS232, RS485), TCP, USB
-
Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
-
Supported data formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
-
Protocol
HTTP(S), MQTT, Azure MQTT, Kinesis
MQTT GATEWAY
-
MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
-
Supported modes
TCP Master, DNP3 Outstation, RTU Master
DLMS
-
DLMS Support
DLMS - standard protocol for utility meter data exchange
API
-
Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
-
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
FOTA
Firmware update from server, automatic notification
-
SSH
SSH (v1, v2)
-
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Call
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
-
TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT
MQTT Broker, MQTT publisher
-
SNMP
SNMP (v1, v2, v3), SNMP Trap
-
JSON-RPC
Management API over HTTP/HTTPS
-
RMS
Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Cloud of Things
Allows monitoring of: Device data, Mobile data, Network info, Availability
-
ThingWorx
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Cumulocity
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Azure IoT Hub
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
-
CPU
Mediatek, 580 MHz, MIPS 24KEc
-
RAM
128 MB, DDR2
-
FLASH storage
16 MB, SPI Flash
FIRMWARE / CONFIGURATION
-
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup
-
FOTA
Update FW
-
RMS
Update FW/configuration for multiple devices at once
-
Keep settings
Update FW without losing current configuration
FIRMWARE CUSTOMISATION
-
Operating system
RutOS (OpenWrt based Linux OS)
-
Supported languages
Busybox shell, Lua, C, C++
-
Development tools
SDK package with build environment provided
LOCATION TRACKING
-
GNSS
GPS, GLONASS, BeiDou, Galileo and QZSS
-
Coordinates
GNSS coordinates via WebUI, SMS, TAVL, RMS
-
NMEA
NMEA 0183
-
NTRIP
NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
-
Server software
Supported server software TAVL, RMS
-
Geofencing
Configurable multiple geofence zones
SERIAL
-
RS232
DB9 connector, RS232 (with RTS, CTS flow control)
-
RS485
RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
-
Serial functions
Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
USB
-
Data rate
USB 2.0
-
Applications
Samba share, USB-to-serial
-
External devices
Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
-
Storage formats
FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
INPUT / OUTPUT
-
Input
1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
-
Output
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
-
Events
Email, RMS, SMS
-
I/O juggler
Allows to set certain I/O conditions to initiate event
POWER
-
Connector
4-pin industrial DC power socket
-
Input voltage range
9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
-
PoE (passive)
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC
-
Power consumption
< 2 W idle, < 7 W Max
PHYSICAL INTERFACES
-
Ethernet
4 x RJ45 ports, 10/100 Mbps
-
I/O’s
2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)
-
Status LEDs
1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
-
SIM
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
-
Power
1 x 4-pin power connector
-
Input/output
1 x 10-pin industrial socket for inputs/outputs
-
Antennas
2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
-
USB
1 x USB A port for external devices
-
RS232
1 x DB9 socket
-
RS485
1 x 6-pin industrial socket
-
Reset
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
-
Casing material
Aluminium housing, plastic panels
-
Dimensions (W x H x D)
110 x 50 x 100 mm
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
-
Weight
287 g
-
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
-
Operating temperature
-40 °C to 75 °C
-
Operating humidity
10% to 90% non-condensing
-
Ingress Protection Rating
IP30
REGULATORY & TYPE APPROVALS
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
-
Regulatory
CE, UKCA, ANRT, Kenya, CITC, ICASA, FCC, IC, PTCRB, Anatel, RCM, Giteki, IMDA, ECE R118, E-mark, UL/CSA Safety, CB, RoHS, REACH
-
Operator
AT&T, Verizon, T-Mobile
EMC EMISSIONS & IMMUNITY
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
-
Standards
EN 55032:2015 + A11:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-19 V2.1.1
EN 301 489-52 V1.2.1
-
ESD
EN 61000-4-2:2009
-
Radiated Immunity
EN 61000-4-3:2020
-
EFT
EN 61000-4-4:2012
-
Surge immunity (AC Power Line)
EN 61000-4-5:2014 + A1:2017
-
CS
EN 61000-4-6:2014
-
DIP
EN 61000-4-11:2020
RF
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
-
Standards
EN 300 328 V2.2.2
EN 301 511 V12.5.1
EN 301 908-1 V15.2.1
EN 301 908-2 V13.1.1
EN 301 908-13 V13.2.1
EN 303 413 V1.1.1
SAFETY
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
-
Standards
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018
UL/CSA Safety: UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
What are my payment methods
• Bank Transfer - No Fees
• Credit Cards - VISA, MasterCard 1.5% Handling Fee
• PayPal - 2.75% Handling Fee
Bank Transfer
In order to pay for your order by bank transfer, you must first complete the
checkout process as normal. Upon completion you will be issued with an invoice
for your order which will be processed once your payment clears. From here you
may log onto your internet banking and make a payment for the order amount to
the bank account listed below. Alternatively, you may visit your local branch,
fill out a Deposit Slip with the correct details using the information below
and process this transfer with the bank teller in person.
Bank: Westpac Banking
Corporation
Account Name: ZCOMPUTE PTY LTD.
BSB: 034108
Account Number: 606317
Please add your invoice number and name in the description area when placing your deposit. If you do not have the relevant details on hand, or are unable to add the description, please email or fax through a copy of your deposit receipt as soon as possible. Please note that your order will not be processed until the funds have successfully deposited into our bank account and the payment has been confirmed as received by our accounts department. This process takes 1 - 5 business days.
Credit Card
Zotim accepts all major credit cards - Visa,
Master Card and Debit Cards. Please note, credit card handling fees do apply as
follows: VISA/MasterCard at 1.5%. These fees are comprised of Merchant Service
fees, Terminals fees, fraud prevention costs that cannot absorb due to the
extremely lower than retail prices we offer.
Please note: Due to the rise of credit card fraud
and for your security all credit card orders will be subject to advanced
security checks. If your order does not meet our security check requirements,
you will be contacted and further credit card security procedures will be
implemented.
Shipping
We prefer to use couriers for shipping which include Couriers Please. Startrack and Toll Express.
The courier require a signature on delivery so please give a delivery address where someone will be available to sign for the parcel.
We can use Australia Post as well, however parcels sent through Australia Post are not insured for loss or damage.
How is shipping cost calculated?Shopping at zotim.com.au is all about how much you can save with our shipping methods. As a brief summary - if you buy more than 1 item, your shipping cost for the 2nd, 3rd & subsequent items will be less than the first item!
We can afford this mainly because the cost of the delivery driver travelling to your address is already covered by the first parcel delivery charge, so the remaining parcels are only charged by the additional weight.
Note that we aren't always able to add items to orders after the order is placed, so be sure to order everything you want in one go when you first checkout, to ensure the quickest possible processing of your order, and the lowest possible shipping cost. We also aren't able to merge orders - the above images show what is possible if all items from Order 1 and 2 are ordered on a single order, it does not infer that we can combine multiple orders (our system is unable to accommodate this at this time).
Contact Info
Information
Customer Service
Zotim is a trading name of Zcompute Pty Ltd (ABN 94 613 746 535) — © 2026 Zcompute Pty Ltd. All rights reserved.